editBootdata ok (command line is ro root=LABEL=/1 rhgb quiet console=ttyS1,115200 console=tty)
Linux version 2.6.9-55.ELsmp (mockbuild@builder6.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed May 2 14:04:42 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cfb50000 (usable)
BIOS-e820: 00000000cfb50000 - 00000000cfb66000 (reserved)
BIOS-e820: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
BIOS-e820: 00000000cfb85c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
ACPI: RSDP (v002 DELL ) @ 0x00000000000f1ce0
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f1d7c
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f1ebc
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f1fb0
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2067
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f20b7
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f20ef
ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f212b
ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f225f
ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cfb6ab28
ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cfb6ad38
ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cfb6a9a8
ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cfb6a9d8
ACPI: TCPA (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f23e1
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
On node 0 totalpages: 2293760
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 2289664 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.4 present.
ServerWorks chipset detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Processor #5 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
Processor #2 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
Processor #3 6:7 APIC version 16
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 6:7 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Setting APIC routing to flat
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Checking aperture...
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet console=ttyS1,115200 console=tty
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 2327.508 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Placing software IO TLB between 0x28c3000 - 0x68c3000
Memory: 8160864k/9175040k available (2112k kernel code, 0k reserved, 1305k data, 208k init)
Calibrating delay using timer specific routine.. 4658.27 BogoMIPS (lpj=2329139)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
using mwait in idle threads.
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
Using IO APIC NMI watchdog
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
per-CPU timeslice cutoff: 6142.75 usecs.
task migration cache decay timeout: 6 msecs.
Booting processor 1/4 rip 6000 rsp 10037ea5f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327516)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU1: Physical Processor ID: 1
CPU1: Processor Core ID: 4
CPU1: Initial APIC ID: 4
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Booting processor 2/1 rip 6000 rsp 1000695df58
Initializing CPU#2
Calibrating delay using timer specific routine.. 4654.98 BogoMIPS (lpj=2327494)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU2: Physical Processor ID: 0
CPU2: Processor Core ID: 1
CPU2: Initial APIC ID: 1
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Booting processor 3/5 rip 6000 rsp 10228513f58
Initializing CPU#3
Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327513)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU3: Physical Processor ID: 1
CPU3: Processor Core ID: 5
CPU3: Initial APIC ID: 5
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Booting processor 4/2 rip 6000 rsp 10228549f58
Initializing CPU#4
Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327507)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU4: Physical Processor ID: 0
CPU4: Processor Core ID: 2
CPU4: Initial APIC ID: 2
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Booting processor 5/6 rip 6000 rsp 10037e01f58
Initializing CPU#5
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327517)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU5: Physical Processor ID: 1
CPU5: Processor Core ID: 6
CPU5: Initial APIC ID: 6
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Booting processor 6/3 rip 6000 rsp 10037e37f58
Initializing CPU#6
Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327506)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU6: Physical Processor ID: 0
CPU6: Processor Core ID: 3
CPU6: Initial APIC ID: 3
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Booting processor 7/7 rip 6000 rsp 10037e6df58
Initializing CPU#7
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327515)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU7: Physical Processor ID: 1
CPU7: Processor Core ID: 7
CPU7: Initial APIC ID: 7
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Total of 8 processors activated (37243.41 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 20.781 MHz APIC timer.
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
time.c: Using HPET/TSC based timekeeping.
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 177
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:0e:0d.0[A] -> GSI 19 (level, low) -> IRQ 193
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1202142552.912:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key DAE26F1F22977E4C
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
ACPI: Processor [CPU5] (supports C1)
ACPI: Processor [CPU6] (supports C1)
ACPI: Processor [CPU7] (supports C1)
ACPI: Processor [CPU8] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-STDVD-ROM GDR-T10N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X DVD-ROM drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 208k freed
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 177
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 177, pci mem ffffff0000002000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 177, io base 000000000000cce0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 185, io base 000000000000ccc0
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 177, io base 000000000000cca0
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 185, io base 000000000000cc80
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-5: new high speed USB device using address 4
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using address 5
ehci_hcd 0000:00:1d.7: qh 0000010000520320 (#0) state 1
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
usb 1-1.2: new high speed USB device using address 6
scsi0 : SCSI emulation for USB Mass Storage devices
isa bounce pool size: 16 pages
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 02
USB Mass Storage device found at 6
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
USB Mass Storage device found at 6
usb 3-1: new low speed USB device using address 2
input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1
input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1
megasas: 00.00.03.16 Mon Oct. 15 08:15:20 PDT 2007
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:01:00.0 to 64
megasas: FW now in Ready state
megasas: max_sectors : 0x280, cmd_per_lun : 0x80
scsi2 : LSI Logic SAS based MegaRAID driver
Vendor: DP Model: BACKPLANE Rev: 1.05
Type: Enclosure ANSI SCSI revision: 05
Vendor: DELL Model: PERC 6/i Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 570949632 512-byte hdwr sectors (292326 MB)
SCSI device sdb: drive cache: write back, no read (daft)
SCSI device sdb: 570949632 512-byte hdwr sectors (292326 MB)
SCSI device sdb: drive cache: write back, no read (daft)
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi2, channel 2, id 0, lun 0
libata version 2.00 loaded.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
sr0: scsi-1 drive
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
inserting floppy driver for 2.6.9-55.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.43-rh (June 28, 2006)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth0
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 001c23d8cfc9
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth1
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 001c23d8cfcb
hw_random hardware driver 1.0.0 loaded
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80408540(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sdb1, internal journal
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
cdrom: open failed.
Adding 8385920k swap on /dev/sdb2. Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 7
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 2
microcode: No new microdata for cpu 4
microcode: No new microdata for cpu 3
microcode: No new microdata for cpu 0
microcode: No new microdata for cpu 6
microcode: No new microdata for cpu 5
IA-32 Microcode Update Driver v1.14 unregistered
cdrom: open failed.
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
MSI INIT SUCCESS
bnx2: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2002 Netfilter core team
bnx2: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
i2c /dev entries driver
lp: driver loaded but no devices found
eth0: no IPv6 routers present
ipmi message handler version 33.13
IPMI System Interface driver version 33.13, KCS version 33.13, SMIC version 33.13, BT version 33.13
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca8, slave address 0x20
IPMI kcs interface initialized
ipmi device interface version 33.13
eth1: no IPv6 routers present
Fusion MPT base driver 3.02.73rh
Copyright (c) 1999-2006 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.02.73rh
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg2 at scsi2, channel 0, id 32, lun 0, type 13
Attached scsi generic sg3 at scsi2, channel 2, id 0, lun 0, type 0
Device sr0 not ready.
[PageInfo]
LastUpdate: 2008-03-30 16:34:37, ModifiedBy: nabeshin
[Permissions]
view:all, edit:login users, delete/config:doc editors