editLinux version 2.6.9-55.ELsmp (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 17:03:35 EDT 2007
BIOS-provided physical RAM map:
********************************************************
* This system has more than 16 Gigabyte of memory. *
* It is recommended that you read the release notes *
* that accompany your copy of Red Hat Enterprise Linux *
* about the recommended kernel for such configurations *
********************************************************
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
16256MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
NX (Execute Disable) protection: active
On node 0 totalpages: 4390912
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 4161536 pages, LIFO batch:16
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 DELL ) @ 0x000f2620
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f26a0
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f27a8
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f289c
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f297d
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f29cd
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2a05
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x00000000
ServerWorks chipset detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03f1000 soft=c03d1000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 16631684k/17563648k available (1882k kernel code, 144256k reserved, 761k data, 188k init, 15859360k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1995.076 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3992.55 BogoMIPS (lpj=1996278)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
per-CPU timeslice cutoff: 11700.69 usecs.
task migration cache decay timeout: 11 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03f2000 soft=c03d2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995002)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Booting processor 2/6 eip 3000
CPU 2 irqstacks, hard=c03f3000 soft=c03d3000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3990.08 BogoMIPS (lpj=1995044)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU2: Physical Processor ID: 3
CPU2: Processor Core ID: 6
CPU2: Initial APIC ID: 6
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Booting processor 3/7 eip 3000
CPU 3 irqstacks, hard=c03f4000 soft=c03d4000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3990.14 BogoMIPS (lpj=1995070)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU3: Physical Processor ID: 3
CPU3: Processor Core ID: 7
CPU3: Initial APIC ID: 7
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000140
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Total of 4 processors activated (15962.78 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 933k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb1fe, last bus=16
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort.
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt 0000:00:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 78 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:10:0d.0[A] -> GSI 19 (level, low) -> IRQ 201
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1193072590.475:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 3629C5F482105A7
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVD-ROM GDR-8084N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X DVD-ROM drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 1048576 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 188k freed
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 177
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 177, pci mem f881a000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 177, io base 0000bce0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 185, io base 0000bcc0
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 177, io base 0000bca0
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-5: new high speed USB device using address 4
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using address 5
ehci_hcd 0000:00:1d.7: qh c9a31280 (#0) state 1
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
usb 1-1.2: new high speed USB device using address 6
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 02
USB Mass Storage device found at 6
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
USB Mass Storage device found at 6
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: Dell Model: Virtual Flash Rev: 123
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 32768 512-byte hdwr sectors (17 MB)
sdb: Write Protect is off
sdb: Mode Sense: 24 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 32768 512-byte hdwr sectors (17 MB)
sdb: Write Protect is off
sdb: Mode Sense: 24 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
USB Mass Storage device found at 6
usb 3-1: new low speed USB device using address 2
input: USB HID v1.10 Keyboard [Tripplite B015-000 R0.74 USB to PS2 adapter.] on usb-0000:00:1d.1-1
input: USB HID v1.10 Mouse [Tripplite B015-000 R0.74 USB to PS2 adapter.] on usb-0000:00:1d.1-1
QLogic Fibre Channel HBA Driver
megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 78 (level, low) -> IRQ 193
megasas: FW now in Ready state
scsi3 : LSI Logic SAS based MegaRAID driver
Vendor: DP Model: BACKPLANE Rev: 1.05
Type: Enclosure ANSI SCSI revision: 05
Vendor: DELL Model: PERC 5/i Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 142082048 512-byte hdwr sectors (72746 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 142082048 512-byte hdwr sectors (72746 MB)
SCSI device sdc: drive cache: write through
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
Attached scsi disk sdc at scsi3, channel 2, id 0, lun 0
libata version 2.00 loaded.
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 169
qla2400 0000:0c:00.0: Found an ISP2432, irq 169, iobase 0xf8820000
qla2400 0000:0c:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:0c:00.0 to 64
qla2400 0000:0c:00.0: Configure NVRAM parameters...
qla2400 0000:0c:00.0: Verifying loaded RISC code...
qla2400 0000:0c:00.0: Allocated (1061 KB) for firmware dump...
qla2400 0000:0c:00.0: Waiting for LIP to complete...
qla2400 0000:0c:00.0: LIP reset occured (f8f7).
qla2400 0000:0c:00.0: LIP occured (f8f7).
qla2400 0000:0c:00.0: LOOP UP detected (4 Gbps).
qla2400 0000:0c:00.0: Topology - (Loop), Host Loop address 0x7c
scsi4 : qla2xxx
qla2400 0000:0c:00.0:
QLogic Fibre Channel HBA Driver: 8.01.04-d8
QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:0c:00.0 hdma+, host#=4, fw=4.00.23 [IP]
ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 169
qla2400 0000:0e:00.0: Found an ISP2432, irq 169, iobase 0xf8868000
qla2400 0000:0e:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:0e:00.0 to 64
qla2400 0000:0e:00.0: Configure NVRAM parameters...
qla2400 0000:0e:00.0: Verifying loaded RISC code...
qla2400 0000:0e:00.0: Allocated (1061 KB) for firmware dump...
qla2400 0000:0e:00.0: Waiting for LIP to complete...
qla2400 0000:0e:00.0: LIP reset occured (f8f7).
qla2400 0000:0e:00.0: LIP occured (f8f7).
qla2400 0000:0e:00.0: LOOP UP detected (4 Gbps).
qla2400 0000:0e:00.0: Topology - (Loop), Host Loop address 0x7c
scsi5 : qla2xxx
qla2400 0000:0e:00.0:
QLogic Fibre Channel HBA Driver: 8.01.04-d8
QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:0e:00.0 hdma+, host#=5, fw=4.00.23 [IP]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 caddy
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
inserting floppy driver for 2.6.9-55.ELsmp
floppy0: no floppy controllers found
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.43-rh (June 28, 2006)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth0
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 001372faa631
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth1
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 169, node addr 001372faa633
hw_random hardware driver 1.0.0 loaded
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0346240(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sdc1, internal journal
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
cdrom: open failed.
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 3
microcode: No new microdata for cpu 2
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
MSI INIT SUCCESS
bnx2: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
i2c /dev entries driver
lp: driver loaded but no devices found
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
[PageInfo]
LastUpdate: 2008-03-30 16:32:08, ModifiedBy: nabeshin
[Permissions]
view:all, edit:login users, delete/config:doc editors