Crash Recovery Kit (CRK) for Linux is a tool which can recover your crashed PC.
sigrok-cli is a portable, cross-platform, command-line logic analyzer program that supports various (usually USB-based) logic analyzer hardware products. It can decode various protocols, such as SPI, I2C, USB, UART, and many others.
相關的專案gsynaptics, Dumpper v.60.3, FeliCa Library, CrystalDiskInfo, Win32 Disk Imager |
Key Scripter listens to key press/release events from a keyboard or a mouse and sends fake key events to an X display. It supports gaming keypads such as the Nostromo SpeedPad and allows the creation and usage of complicated key scripts for games and other applications.
相關的專案MPC-BE, MeCab, GLOBALBASE PROJECT, CrystalDiskInfo, Win32 Disk Imager |
GSmartControl is a graphical user interface for
smartctl. It allows you to inspect the hard
drive's SMART data to determine its health, as
well as run various tests on it.
相關的專案Hinemos, FeliCa Library, Dumpper v.60.3, Wireshark, MPC-BE |
LinCAN is a Linux kernel module which implements a CAN driver capable of working with multiple cards, even with different chips and IO methods. Each communication object can be accessed from multiple applications concurrently. The driver supports Linux 2.4.x, 2.6.x, and 3.x kernels and implements select, poll, fasync, O_NONBLOCK, and O_SYNC semantics and multithreaded read/write capabilities. It works with the common Intel i82527, Philips 82c200, and Philips SJA1000 (in standard and PeliCAN mode) CAN controllers. It is part of a set of CAN/CANopen-related components developed as one of the OrtCAN project components.
相關的專案SmillaEnlarger, OpenTween, DeSmuME, iReport-Designer for JasperReports, Amateras |
The devfsd program is a daemon, run by the system
boot, which can provide for intelligent management
of device entries in the Device Filesystem
(devfs). It is desirable to start the daemon at
the beginning of the boot scripts, in particular
before filesystem checks.
Ewrt is a Linux distribution for the Linksys WRT54G that was
forked from the Linksys and Sveasoft code bases. It is
designed to meet the needs of open wireless network
operators by providing a captive portal based on NoCatSplash
and large-scale management functionality on a stable and
low-cost platform.
Ink is a command line tool which displays the ink level of your printer. It makes use of libinklevel.
相關的專案Win32 Disk Imager, Hinemos, Media Player Classic - Home Cinema, Gutenberg Labo, 再生龍 |
IPMItool is a simple command-line interface to systems
that support the Intelligent Platform Management
Interface (IPMI) specification. It provides the ability to
read the SDR and print sensor values, display the
contents of the SEL, print FRU information, read and set
LAN configuration parameters, perform remote chassis
power control, and act as a serial over LAN client.
It can work with IPMI-over-LAN (both version 1.5 and 2.0)
interfaces as well as the system interface provided by a
kernel driver such as OpenIPMI.
相關的專案再生龍, MeCab, Media Player Classic - Home Cinema, Hinemos, Dumpper v.60.3 |
USBView is a GTK application to display information about the topology of the devices connected to the USB bus on a Linux machine. It also displays detailed information on the individual devices.
相關的專案FeliCa Library, MeCab, Dumpper v.60.3, CrystalDiskInfo, gsynaptics |
GPixPod is an application for uploading and
organizing photos and photo albums on recent Apple
iPod models.
RUNT (ResNet USB Network Tester) is Slackware Linux designed to run off of a 128 MB USB pen drive. It consists of a boot floppy image and a zip file, similar to zipslack. It is intended to be a fairly complete Linux installation for use as a testing tool capable of booting on any x86 computer with a USB port and a bootable floppy drive.
TTA-based Co-design Environment (TCE) is a toolset that provides a complete co-design flow from C programs down to synthesizable VHDL and parallel program binaries. Processor customization points include the register files, function units, supported operations, and the interconnection network.
Clewarecontrol lets you control the USB connected
sensors and switches sold by Cleware GmbH. It
allows you to read the sensors (temperature,
humidity), toggle and configure the external
switches, start the watchdog, and lots more.
相關的專案DeSmuME, CrystalDiskInfo, iReport-Designer for JasperReports, TERASOLUNA Framework, SmillaEnlarger |
Scsiaddgui provides a graphical user interface for
the Scsiadd utility, which allows you to add or
remove SCSI devices without having to reboot.
相關的專案MeCab, 再生龍, Media Player Classic - Home Cinema, gsynaptics, MPC-BE |
檔案下載統計 | ||
|---|---|---|
| 更多 >> |
