device/generic/common
| 修訂 | fd81c562d307a2e47f9d0be1b2723a1724eaaf42 (tree) |
|---|---|
| 時間 | 2015-10-07 00:09:17 |
| 作者 | Chih-Wei Huang <cwhuang@linu...> |
| Commiter | Chih-Wei Huang |
Add more firmwares
* ath10k QCA6174
* brcmfmac43340
firmware/ath10k/QCA6174/hw2.1/board.bin (diff) firmware/ath10k/QCA6174/hw2.1/firmware-5.bin (diff) firmware/ath10k/QCA6174/hw3.0/board.bin (diff) firmware/ath10k/QCA6174/hw3.0/firmware-4.bin (diff)
firmware/brcm/brcmfmac43340-sdio.txt (diff)| @@ -0,0 +1,128 @@ | ||
| 1 | +#X205_AP6234A_NVRAM_V1.4.7_20140730_WIN8.1_WW.txt | |
| 2 | +# 20140731 v1.4.7 | |
| 3 | +# Initial version for X205 | |
| 4 | +manfid=0x2d0 | |
| 5 | +prodid=0x0653 | |
| 6 | +vendid=0x14e4 | |
| 7 | +devid=0x4386 | |
| 8 | +boardtype=0x0653 | |
| 9 | +boardrev=0x1203 | |
| 10 | +boardnum=22 | |
| 11 | +macaddr=00:90:4c:c5:12:38 | |
| 12 | +sromrev=3 | |
| 13 | +#boardflags: | |
| 14 | +# bit 19 3tswitch: 2.4GHz FEM: SP3T switch share with BT | |
| 15 | +# bit 16 nopa: no external pa | |
| 16 | +# keep original 0x200 | |
| 17 | +boardflags=0x0090201 | |
| 18 | +xtalfreq=37400 | |
| 19 | +nocrc=1 | |
| 20 | +ag0=255 | |
| 21 | +aa2g=1 | |
| 22 | +ccode=XV | |
| 23 | +regrev=1 | |
| 24 | +pa0itssit=0x20 | |
| 25 | +#PA parameters for 2.4GHz | |
| 26 | +pa0b0=7086 | |
| 27 | +pa0b1=-842 | |
| 28 | +pa0b2=-162 | |
| 29 | +tssifloor2g=63 | |
| 30 | +# rssi params for 2.4GHz | |
| 31 | +rssismf2g=0xf | |
| 32 | +rssismc2g=0x8 | |
| 33 | +rssisav2g=0x1 | |
| 34 | +cckPwrOffset=3 | |
| 35 | +# rssi params for 5GHz | |
| 36 | +rssismf5g=0xf | |
| 37 | +rssismc5g=0x7 | |
| 38 | +#rssisav5g=0x1 | |
| 39 | +rssisav5g=0x3 | |
| 40 | +#PA parameters for lower a-band | |
| 41 | +pa1lob0=0x16D9 | |
| 42 | +pa1lob1=0xFD47 | |
| 43 | +pa1lob2=0xFF4E | |
| 44 | +tssifloor5gl=32 | |
| 45 | +#PA parameters for midband | |
| 46 | +pa1b0=0x15FF | |
| 47 | +pa1b1=0xFD77 | |
| 48 | +pa1b2=0xFF75 | |
| 49 | +tssifloor5gm=34 | |
| 50 | +#PA paramasdeters for high band | |
| 51 | +pa1hib0=0x158D | |
| 52 | +pa1hib1=0xFD7D | |
| 53 | +pa1hib2=0xFF6C | |
| 54 | +tssifloor5gh=32 | |
| 55 | +rxpo5g=0 | |
| 56 | +maxp2ga0=80 | |
| 57 | +# 19.5dBm max; 18dBm target | |
| 58 | +#Per rate power back-offs for g band, in .5 dB steps. Set it once you have the right numbers. | |
| 59 | +cck2gpo=0x6666 | |
| 60 | +ofdm2gpo=0xaaaa6666 | |
| 61 | +# R54 16dBm; R48 17dBm; others 18dBm | |
| 62 | +mcs2gpo0=0x5555 | |
| 63 | +# M0~ M4 17dBm | |
| 64 | +mcs2gpo1=0xcccc | |
| 65 | +# M5M6 15dBm; M7 14.5dBm | |
| 66 | +#max power for 5G | |
| 67 | +maxp5ga0=68 | |
| 68 | +# 16dBm target; 17.5dBm Max | |
| 69 | +maxp5gla0=68 | |
| 70 | +maxp5gha0=68 | |
| 71 | +#Per rate power back-offs for a band, in .5 dB steps. Set it once you have the right numbers. | |
| 72 | +ofdm5gpo=0x44441111 | |
| 73 | +# R54 13.5dBm | |
| 74 | +ofdm5glpo=0x44441111 | |
| 75 | +ofdm5ghpo=0x55551111 | |
| 76 | +mcs5gpo0=0x0000 | |
| 77 | +# M0~M4 16dBm (1dB higher than ofdm) | |
| 78 | +mcs5gpo1=0x5555 | |
| 79 | +# M5M6 13.5dBm; M7 12dBm | |
| 80 | +mcs5glpo0=0x0000 | |
| 81 | +mcs5glpo1=0x5555 | |
| 82 | +mcs5ghpo0=0x0000 | |
| 83 | +mcs5ghpo1=0x5555 | |
| 84 | +# Parameters for DAC2x mode and ALPF bypass | |
| 85 | +# RF SW Truth Table: ctrl0 for BT_TX; ctrl1 or 5G Tx; ctrl2 for 5G Rx; Ctrl3 for 2G Tx; Ctrl4 for 2G Rx | |
| 86 | +swctrlmap_2g=0x00080008,0x00100010,0x00080008,0x011010,0x11f | |
| 87 | +swctrlmap_5g=0x00040004,0x00020002,0x00040004,0x011010,0x2fe | |
| 88 | +gain=32 | |
| 89 | +triso2g=8 | |
| 90 | +triso5g=8 | |
| 91 | +#tx parameters | |
| 92 | +loflag=0 | |
| 93 | +iqlocalidx5g=40 | |
| 94 | +dlocalidx5g=70 | |
| 95 | +iqcalidx5g=50 | |
| 96 | +lpbckmode5g=1 | |
| 97 | +txiqlopapu5g=0 | |
| 98 | +txiqlopapu2g=0 | |
| 99 | +dlorange_lowlimit=5 | |
| 100 | +txalpfbyp=1 | |
| 101 | +txalpfpu=1 | |
| 102 | +dacrate2xen=1 | |
| 103 | +papden2g=1 | |
| 104 | +papden5g=1 | |
| 105 | +#rx parameters | |
| 106 | +gain_settle_dly_2g=4 | |
| 107 | +gain_settle_dly_5g=4 | |
| 108 | +noise_cal_po_2g=-1 | |
| 109 | +noise_cal_po_40_2g=-1 | |
| 110 | +noise_cal_high_gain_2g=73 | |
| 111 | +noise_cal_nf_substract_val_2g=346 | |
| 112 | +noise_cal_po_5g=-1 | |
| 113 | +noise_cal_po_40_5g=-1 | |
| 114 | +noise_cal_high_gain_5g=73 | |
| 115 | +noise_cal_nf_substract_val_5g=346 | |
| 116 | +cckpapden=0 | |
| 117 | + | |
| 118 | +sd_gpout=4 | |
| 119 | +sd_gpval=1 | |
| 120 | +sd_gpdc=0 | |
| 121 | +aci_detect_en_2g=1 | |
| 122 | +interference=3 | |
| 123 | +#BTC params | |
| 124 | +btc_flags=71 | |
| 125 | +btc_params8=15000 | |
| 126 | +btc_params22=8000 | |
| 127 | +btc_params83=20000 | |
| 128 | +btc_params84=10000 |
Fork