Conflict with TI code composer

• 回報者: mir_hossein
• 負責人: (無)
• 類型: 問題回報
• 狀態: 關閉
• 元件: Tera Term
• 里程碑: (無)
• 優先權: 6
• 嚴重程度: 5 - 中
• 處理結果: 無
• 檔案: 無

細節 回覆

I use Teraterm to monitor the serial output of my custom board. On my system I have a COM port without USB to serial converter.

The OS is Windows 7 x64.

To debug the board, I use TI XDS100V2 and Code Composer Studio V6.0.1

If the Teraterm is open on COM1, the Code composer can not connect to the board. Closing Teraterm resolves the issue.

I checked that there is an FTDI chip on XDS100V2, means the XDS100V2 uses a kind of USB to serial interface but it does not enumerate itself as a COM port in device manager.

Ticket History (3/3 Histories)

2014-11-24 17:56 Updated by: mir_hossein

• New Ticket "Conflict with TI code composer" created

2014-11-24 20:37 Updated by: (del#1144)

評語 回覆

Your request seems to open one COM port by two applications, "Code Composer Studio" and "Tera Term".

I think COM port is exclusive access.

Is any terminal emulators, for example, PuTTY or Hyperterminal satisfies your wants?

2014-11-24 21:24 Updated by: mir_hossein

• 狀態 Update from 開啟 to 關閉
• Ticket Close date is changed to 2014-11-24 21:24

評語 回覆

Reply To maya

Your request seems to open one COM port by two applications, "Code Composer Studio" and "Tera Term". I think COM port is exclusive access. Is any terminal emulators, for example, PuTTY or Hyperterminal satisfies your wants?

Ok, I have checked with Hyperterminal and got the same result.
It seems that the problem is in "Code composer studio", I should discuss it with TI developers.
Thank you.