Not able to select COM ports >4

• 回報者: (匿名)
• 負責人: (無)
• 類型: 問題回報
• 狀態: 關閉
• 元件: Tera Term
• 里程碑: (無)
• 優先權: 5 - 中
• 嚴重程度: 7
• 處理結果: Out of Date
• 檔案: 無

細節 回覆

Hi,

I had version 4.52 installed and it worked fine with my USB-Serial dongle on COM5,7 or 8 depending which USB port I used.

After upgrade to version 4.64 or 4.65 I only see "COM1" and "COM2" in "Serial port" settings dialog and I cannot select COM5 or above anymore.

Whats wrong?

Ticket History (3/4 Histories)

2010-05-05 16:35 Updated by: None

• New Ticket "Not able to select COM ports >4" created

2010-05-05 16:45 Updated by: None

評語 回覆

You can specify MaxComPort in TERATERM.INI.

2010-05-09 20:31 Updated by: (del#1144)

• 處理結果 Update from 無 to Out of Date

2010-08-09 21:30 Updated by: (del#1144)

• 狀態 Update from 開啟 to 關閉
• Ticket Close date is changed to 2010-08-09 21:30

評語 回覆

This ticket is closed.

If you set MaxComPort lager than 4 (e.g. 10) and COM5,7 or 8 is not appear in New connection dialog, please add a comment to this ticket.