device/generic/firmware
修訂 | 4f241f16650136dcc311b9cd0ff48edc4a524996 (tree) |
---|---|
時間 | 2020-03-06 12:19:22 |
作者 | Chih-Wei Huang <cwhuang@linu...> |
Commiter | Chih-Wei Huang |
Update firmwares of rtl8723bs_bt
Reported-by: youling 257 <youling257@gmail.com>
Tested-by: XiaoTao Liu <kevin.liu912@gmail.com>
@@ -0,0 +1,56 @@ | ||
1 | +# NVRAM file for BCM943430WLSELG | |
2 | +# 2.4 GHz, 20 MHz BW mode | |
3 | + | |
4 | +# The following parameter values are just placeholders, need to be updated. | |
5 | +manfid=0x2d0 | |
6 | +prodid=0x0726 | |
7 | +vendid=0x14e4 | |
8 | +devid=0x43e2 | |
9 | +boardtype=0x0726 | |
10 | +boardrev=0x1101 | |
11 | +boardnum=22 | |
12 | +macaddr=00:90:4c:c5:12:38 | |
13 | +sromrev=11 | |
14 | +boardflags=0x00404201 | |
15 | +xtalfreq=26000 | |
16 | +nocrc=1 | |
17 | +ag0=255 | |
18 | +aa2g=1 | |
19 | +ccode=CN | |
20 | + | |
21 | +pa0itssit=0x20 | |
22 | +extpagain2g=0 | |
23 | + | |
24 | +#PA parameters for 2.4GHz, measured at CHIP OUTPUT | |
25 | +pa2ga0=-168,6009,-726 | |
26 | +AvVmid_c0=0x0,0xc8 | |
27 | +cckpwroffset0=5 | |
28 | + | |
29 | +# PPR params | |
30 | +maxp2ga0=78 | |
31 | +txpwrbckof=6 | |
32 | +cckbw202gpo=0 | |
33 | +legofdmbw202gpo=0x66111111 | |
34 | +mcsbw202gpo=0x77711111 | |
35 | + | |
36 | +# OFDM IIR : | |
37 | +ofdmdigfilttype=18 | |
38 | +ofdmdigfilttypebe=18 | |
39 | +# PAPD mode: | |
40 | +papdmode=1 | |
41 | +#papdvalidtest=3 | |
42 | + | |
43 | +il0macaddr=00:90:4c:c5:12:38 | |
44 | +wl0id=0x431b | |
45 | + | |
46 | +deadman_to=0xffffffff | |
47 | +# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG | |
48 | +muxenab=0x1 | |
49 | +# CLDO PWM voltage settings - 0x4 - 1.1 volt | |
50 | +#cldo_pwm=0x4 | |
51 | + | |
52 | +#Out-of-band GPIO Wakeup | |
53 | +sd_gpout=0 | |
54 | +sd_gpval=1 | |
55 | +sd_gpdc=0 | |
56 | +rssicorrnorm=15 | |
\ No newline at end of file |